Institute of General Chemical Engineering has following equipment for various purposes

For determination of composition

  • Liquid chromatograph with UV, fluorescent and light scattering detectors Waters ACQUITY UPLC H-Class Core System with Column Heater 30-A, TUV, ELS, Fluorescence Detectors.
  • X-ray powder diffractometer, PANalytical X’Pert PRO
  • Scanning electron microscope, High Resolution Schottky Field Emission Scanning Electron Microscope with SE/BSE detectors and EDS unit. Mira Tescan. Data examples. Technical data.
  • FT-IR spectrometer, Varian 800 FT-IR Scimitar Series
  • UV/VIS spectrometers, Evolution 300, Thermo Scientific; and Jenway 6405

For particle size determination:

  • Laser granulometer, Fritsch analysette 22 Nano Tech
  • Vibrating sieve machine. The mesh size of 45 μm - 4 mm. FRITSCH Analysette 3
  • Ultrasonic cleaning machine.
  • Optical Microscopes and Scanning electron microscope

For liquids

  • 2 – 25 liter Synthesis Reactors with dosing systems TITRONIC universal®
  • Automated titration apparatus (Mettler Toledo T90) with built-in magnetic and a propeller stirrer and electrodes for red-ox reactions, pH control in aqueous and non-aqueous medium and acid base and selective electrode of Ca2+.
  • Bioreactor EDF 5.3-1.
  • Water distillers and deionisers
  • Centrifuges: 12 ml and 50ml per vial
  • Several shakers, mixers and shakers-incubators.
  • Ultrasonic baths – 1 L and 20 L
  • Rotational viscometer. Anton Paar RheolabQC 

For pastes and powders

  • Extruder, maximum yield – 120 kg/h,press power – 5.5 kW, vacuum 50-40 mbar, cooling with water, DORST Cale-Parmer
  • Mixer-kneader, for prepearing raw material till 8kg with cooling function (10-12 °C), AMK III U 8/IV
  • Extrusion Simulator KP50A Capillar chech
  • Facility for determining the plasticity, MultiTest1 AFG 100N
  • Moisture analyzer for determining moisture content in pastes and powders till constant weight at 30 ° -230 ° C, 0.2 to 120 g. Kern MRS120-3
  • Rotational viscometer RheolabQC (Anton Paar)
  • Multifunctional press, maximum force - 1000 kN and 100 kN. P / O / Weber PW 100 EU and 40 PK
  • Laboratory freeze dryer - BETA 2-8 LSC plus

High-temperature equipment

  • High-temperature optical dilatometer (microscope). maximum operating temperature = 1400°C± 3 °C, EM201, HT163, Hesse instruments
  • High-temperature DTA/DSC, temperature range 100°-1400°C, heating/cooling rate 0,01-100 K/min, Bahr-Thermoanalyse
  • Spray drying device BUCHI Mini Spray Dryer B-290
  • Steam sterilizer (autoclave) temperature 0...95 °C, time 3...99 min
  • Universal oven, sterilizer, incubator (4 pcs) Excellent Memmert max 220° C ± 1
  • Various ovens, maximum operating temperature = 1650°C± 3 °C
  • Vacuum oven, maximum operating temperature = 1500°C± 3 °C


  • Stereomicroscope, magnicifation 10-300x, , Leica MZ16A with digital camera Leica DFC 490 that is attached to a computer.
  • Microscope, magnicifation10-1000x Leica DFC320, DMLP with digital camera that is attached to a computer.
  • Field emission scanning electron microscope, FE-SEM, Tescan Mira/LMU
  • For sample preparation:
    • low speed saw with a diamond disk with a sample holder for various sample shapes
    • different coarseness pastes for polishing samples

Gas adsorption - porosimetry

  • Gas adsorption is used to measure surface areas and porosity of solids. Specific surface area is calculated by Langmuir or BET methods. Microporous and mezoporu distribution of effective radii by a variety of methods. 4 independent dewars, applied adsorbed - nitrogen or other non-corrosive gas with an appropriate condenser, QUADRASORB SI Kr / with standard Autosorb Degassers and accessories.

We offer contract research with our equipment and knowledge. About potential collaboration and contract types you are welcome to contact Jāni Loču

For training students in general chemical engineering

See here